The Pinta
Key Takeaway
The Pinta is classified as low hazard in Montana. It was completed in 1977 and is 49 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 14 ft (taller than 15.6% in MT) |
| Dam Length | 200 ft |
| Dam Type | Earth |
| Max Storage | 67 acre-ft |
| Normal Storage | 18 acre-ft |
| Surface Area | 1 acres |
| Max Discharge | 300 cfs |
| Year Completed | 1977 (49 years old) |
| NID ID | MT03056 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
URSULA CATHEY LANNING
Private
Nearby Dams
Lemon Hart
Carter, MT
Low Hazard 27 ftEdward Lanning #2
Carter, MT
Low Hazard 15 ftEdward Lanning #1
Carter, MT
Low Hazard 20 ftCockran Grazing #3
Carter, MT
Low Hazard 25 ftCockran Grazing #5
Carter, MT
Low Hazard 25 ftAces Wild
Carter, MT
Low Hazard 12 ftJerk #2
Carter, MT
Low Hazard 18 ftCockran Grazing #1
Carter, MT
Low Hazard 25 ftFrequently Asked Questions
What is the hazard classification of The Pinta?
The Pinta is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates The Pinta?
The Pinta is owned by URSULA CATHEY LANNING (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was The Pinta built?
The Pinta was completed in 1977, making it 49 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of The Pinta?
The Pinta serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is The Pinta?
The Pinta has a dam height of 14 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.