Edward Lanning #2
Key Takeaway
Edward Lanning #2 is classified as low hazard in Montana. It was completed in 1960 and is 66 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 15 ft (taller than 18.8% in MT) |
| Dam Length | 400 ft |
| Dam Type | Earth |
| Max Storage | 97 acre-ft |
| Normal Storage | 49 acre-ft |
| Year Completed | 1960 (66 years old) |
| NID ID | MT03039 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
EDWARD LANNING
Private
Nearby Dams
Lemon Hart
Carter, MT
Low Hazard 27 ftEdward Lanning #1
Carter, MT
Low Hazard 20 ftThe Pinta
Carter, MT
Low Hazard 14 ftJerk #2
Carter, MT
Low Hazard 18 ftAces Wild
Carter, MT
Low Hazard 12 ftGerald Craft #6
Carter, MT
Low Hazard 20 ftGerald Craft #3
Carter, MT
Low Hazard 20 ftGerald Craft #5
Carter, MT
Low Hazard 12 ftFrequently Asked Questions
What is the hazard classification of Edward Lanning #2?
Edward Lanning #2 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Edward Lanning #2?
Edward Lanning #2 is owned by EDWARD LANNING (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Edward Lanning #2 built?
Edward Lanning #2 was completed in 1960, making it 66 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Edward Lanning #2?
Edward Lanning #2 serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Edward Lanning #2?
Edward Lanning #2 has a dam height of 15 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.