Sampson Dam
Key Takeaway
Sampson Dam is classified as low hazard in Kentucky. It was completed in 1967 and is 59 years old. Its primary use is recreation.
Physical Details
| Dam Height | 40 ft (taller than 72.8% in KY) |
| Dam Length | 750 ft |
| Dam Type | Earth |
| Max Storage | 172 acre-ft |
| Normal Storage | 108 acre-ft |
| Surface Area | 8 acres |
| Drainage Area | 0 sq mi |
| Year Completed | 1967 (59 years old) |
| NID ID | KY00603 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
RUTH SAMPSON
Private
Nearby Dams
Fern Creek Sportsman Club Dam
Jefferson, KY
Low Hazard 25 ftLowry Dam
Jefferson, KY
Low Hazard 35 ftMirror Lake (Lower) Dam
Jefferson, KY
Low Hazard 28 ftLogan Lake Dam
Jefferson, KY
Low Hazard 36 ftWhitman Dam
Bullitt, KY
Low Hazard 30 ftRiggs Lake Dam
Jefferson, KY
Low Hazard 18 ftGlenmary Dam
Jefferson, KY
Low Hazard 25 ftMt Washington Dam
Bullitt, KY
Low Hazard 33 ftFrequently Asked Questions
What is the hazard classification of Sampson Dam?
Sampson Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Sampson Dam?
Sampson Dam is owned by RUTH SAMPSON (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Sampson Dam built?
Sampson Dam was completed in 1967, making it 59 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Sampson Dam?
Sampson Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Sampson Dam?
Sampson Dam has a dam height of 40 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Sampson Dam last inspected?
Sampson Dam was last inspected on November 14, 2007. Inspection dates indicate when a formal review occurred, not the results of that inspection.