Mt Washington Dam

FLOYDS CREEK· Bullitt, Kentucky· Built 1940· Earth· 33 ft tall
Low Hazard Recreation Local Government

Key Takeaway

Mt Washington Dam is classified as low hazard in Kentucky. It was completed in 1940 and is 86 years old. Its primary use is recreation.

Physical Details

Dam Height 33 ft (taller than 59.2% in KY)
Dam Length640 ft
Dam TypeEarth
Max Storage550 acre-ft
Normal Storage310 acre-ft
Surface Area25 acres
Drainage Area3 sq mi
Year Completed1940 (86 years old)
NID IDKY00254

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: August 18, 2016
State Regulated: Yes
Regulatory Agency: KY Division of Water

Ownership

JEFFERSON COUNTY SPORTSMEN CLUB

Local Government

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Mt Washington Dam?

Mt Washington Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Mt Washington Dam?

Mt Washington Dam is owned by JEFFERSON COUNTY SPORTSMEN CLUB (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Mt Washington Dam built?

Mt Washington Dam was completed in 1940, making it 86 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Mt Washington Dam?

Mt Washington Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Mt Washington Dam?

Mt Washington Dam has a dam height of 33 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Mt Washington Dam last inspected?

Mt Washington Dam was last inspected on August 18, 2016. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.