John Anderson 2
Key Takeaway
John Anderson 2 is classified as low hazard in South Dakota. It was completed in 1945 and is 81 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 12 ft (taller than 3% in SD) |
| Dam Length | 1,230 ft |
| Dam Type | Earth |
| Max Storage | 85 acre-ft |
| Normal Storage | 24 acre-ft |
| Max Discharge | 3,400 cfs |
| Year Completed | 1945 (81 years old) |
| NID ID | SD01896 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
JOHN ANDERSON
Private
Nearby Dams
Anderson 1
Meade, SD
Low Hazard 14 ftAnderson 5
Meade, SD
Low Hazard 16 ftCarl Lungren Dam No.1
Meade, SD
Low Hazard 22 ftPoss Dam
Meade, SD
Low Hazard 24 ftSd Komes 1
Meade, SD
Low Hazard 14 ftBobby Peters 2
Meade, SD
Low Hazard 18 ftPeters 1
Meade, SD
Low Hazard 15 ftWilliamson Dam
Meade, SD
Low Hazard 16 ftFrequently Asked Questions
What is the hazard classification of John Anderson 2?
John Anderson 2 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates John Anderson 2?
John Anderson 2 is owned by JOHN ANDERSON (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was John Anderson 2 built?
John Anderson 2 was completed in 1945, making it 81 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of John Anderson 2?
John Anderson 2 serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is John Anderson 2?
John Anderson 2 has a dam height of 12 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.