Bobby Peters 2
Key Takeaway
Bobby Peters 2 is classified as low hazard in South Dakota. It was completed in 1963 and is 63 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 18 ft (taller than 24.1% in SD) |
| Dam Length | 930 ft |
| Dam Type | Earth |
| Max Storage | 100 acre-ft |
| Normal Storage | 52 acre-ft |
| Max Discharge | 2,400 cfs |
| Year Completed | 1963 (63 years old) |
| NID ID | SD01894 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
THERESA CASTEEL
Private
Nearby Dams
Sd Komes 1
Meade, SD
Low Hazard 14 ftPeters 1
Meade, SD
Low Hazard 15 ftLundren 2
Meade, SD
Low Hazard 19 ftCarl Lungren Dam No.1
Meade, SD
Low Hazard 22 ftGary Ham Dam
Butte, SD
Low Hazard 26 ftAnderson 1
Meade, SD
Low Hazard 14 ftPoss Dam
Meade, SD
Low Hazard 24 ftGeorge Levin Dam No.1
Meade, SD
Low Hazard 10 ftFrequently Asked Questions
What is the hazard classification of Bobby Peters 2?
Bobby Peters 2 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Bobby Peters 2?
Bobby Peters 2 is owned by THERESA CASTEEL (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Bobby Peters 2 built?
Bobby Peters 2 was completed in 1963, making it 63 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Bobby Peters 2?
Bobby Peters 2 serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Bobby Peters 2?
Bobby Peters 2 has a dam height of 18 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.