Evans Reservoir (Wasco)

DRY FORK THREE MILE CREEK· Wasco, Oregon· Built 1953· Earth· 13 ft tall
Low Hazard Irrigation Private

Key Takeaway

Evans Reservoir (Wasco) is classified as low hazard in Oregon. It was completed in 1953 and is 73 years old. Its primary use is irrigation.

Physical Details

Dam Height 13 ft (taller than 10.9% in OR)
Dam Length259 ft
Dam TypeEarth
Max Storage135 acre-ft
Normal Storage90 acre-ft
Surface Area25 acres
Drainage Area1 sq mi
Max Discharge320 cfs
Year Completed1953 (73 years old)
NID IDOR00217

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: June 7, 2018
State Regulated: Yes
Regulatory Agency: OWRD

Ownership

KORTGE BROTHERS, LLC THE DALLES, 97058

Private

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Evans Reservoir (Wasco)?

Evans Reservoir (Wasco) is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Evans Reservoir (Wasco)?

Evans Reservoir (Wasco) is owned by KORTGE BROTHERS, LLC THE DALLES, 97058 (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Evans Reservoir (Wasco) built?

Evans Reservoir (Wasco) was completed in 1953, making it 73 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Evans Reservoir (Wasco)?

Evans Reservoir (Wasco) serves the following purposes: Irrigation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Evans Reservoir (Wasco)?

Evans Reservoir (Wasco) has a dam height of 13 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Evans Reservoir (Wasco) last inspected?

Evans Reservoir (Wasco) was last inspected on June 7, 2018. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.