Barnesville Lake Dam
Key Takeaway
Barnesville Lake Dam is classified as high hazard in Ohio. It was completed in 1969 and is 57 years old. Its primary use is recreation. High hazard means loss of life is likely if the dam fails — it does not indicate the dam's current condition. Learn more.
Physical Details
| Dam Height | 32 ft (taller than 67.5% in OH) |
| Dam Length | 590 ft |
| Dam Type | Earth |
| Max Storage | 153 acre-ft |
| Normal Storage | 100 acre-ft |
| Surface Area | 12 acres |
| Drainage Area | 1 sq mi |
| Max Discharge | 282 cfs |
| Year Completed | 1969 (57 years old) |
| NID ID | OH00877 |
Safety Information
Loss of human life is likely if the dam fails.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Village of Barnesville
Local Government
Nearby Dams
Livezey Lake Dam
Belmont, OH
Low Hazard 33 ftBarnesville Reservoir No. 1 Dam
Belmont, OH
High Hazard 42 ftBarnesville Reservoir No. 2 Dam
Belmont, OH
High Hazard 48 ftBethesda Sportsmans Club Pond Dam
Belmont, OH
Low Hazard 22 ftBarnesville Reservoir No. 3 Dam
Belmont, OH
High Hazard 77 ftEldon Reservoir Dam
Guernsey, OH
Low Hazard 38 ftMeigs-Phillips I No. 1 Dam
Belmont, OH
High Hazard 58 ftBethesda Reservoir Dam
Belmont, OH
Significant Hazard 30 ftFrequently Asked Questions
What is the hazard classification of Barnesville Lake Dam?
Barnesville Lake Dam is classified as High Hazard. Loss of human life is likely if the dam fails. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Barnesville Lake Dam?
Barnesville Lake Dam is owned by Village of Barnesville (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Barnesville Lake Dam built?
Barnesville Lake Dam was completed in 1969, making it 57 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Barnesville Lake Dam?
Barnesville Lake Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Barnesville Lake Dam?
Barnesville Lake Dam has a dam height of 32 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Barnesville Lake Dam last inspected?
Barnesville Lake Dam was last inspected on November 14, 2022. Inspection dates indicate when a formal review occurred, not the results of that inspection.