Meigs-Phillips I No. 1 Dam

LONG RUN· Belmont, Ohio· Built 1987· Earth· 58 ft tall
High Hazard Recreation Private

Key Takeaway

Meigs-Phillips I No. 1 Dam is classified as high hazard in Ohio. It was completed in 1987 and is 39 years old. Its primary use is recreation. High hazard means loss of life is likely if the dam fails — it does not indicate the dam's current condition. Learn more.

Physical Details

Dam Height 58 ft (taller than 95.2% in OH)
Dam Length460 ft
Dam TypeEarth
Max Storage2.3K acre-ft
Normal Storage380 acre-ft
Surface Area28 acres
Drainage Area10 sq mi
Max Discharge22,209 cfs
Year Completed1987 (39 years old)
NID IDOH01229

Safety Information

High Hazard

Loss of human life is likely if the dam fails.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: Yes
Last Inspection: October 5, 2022
State Regulated: Yes
Regulatory Agency: Department of Natural Resources

Ownership

Capstone Mining Company

Private

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Meigs-Phillips I No. 1 Dam?

Meigs-Phillips I No. 1 Dam is classified as High Hazard. Loss of human life is likely if the dam fails. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Meigs-Phillips I No. 1 Dam?

Meigs-Phillips I No. 1 Dam is owned by Capstone Mining Company (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Meigs-Phillips I No. 1 Dam built?

Meigs-Phillips I No. 1 Dam was completed in 1987, making it 39 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Meigs-Phillips I No. 1 Dam?

Meigs-Phillips I No. 1 Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Meigs-Phillips I No. 1 Dam?

Meigs-Phillips I No. 1 Dam has a dam height of 58 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Meigs-Phillips I No. 1 Dam last inspected?

Meigs-Phillips I No. 1 Dam was last inspected on October 5, 2022. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.