Wright - Brink
Key Takeaway
Wright - Brink is classified as low hazard in Colorado. Its primary use is fire protection.
Physical Details
| Dam Height | 33 ft (taller than 72.7% in CO) |
| Dam Length | 553 ft |
| Dam Type | Earth |
| Max Storage | 127 acre-ft |
| Normal Storage | 100 acre-ft |
| Surface Area | 9 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 554 cfs |
| NID ID | CO01983 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
TRAVIS CRAWFORD
Private
Nearby Dams
Owens #2
Huerfano, CO
Low Hazard 15 ftOwens #1
Huerfano, CO
Low Hazard 12 ftCarson, H. R. #2
Huerfano, CO
Low Hazard 19 ftCarson, H. R. #1
Huerfano, CO
Low Hazard 13 ftFielden
Huerfano, CO
Low Hazard 8 ftWahatoya Lake
Huerfano, CO
High Hazard 24 ftDaigre
Huerfano, CO
High Hazard 32 ftJ. O. Smith and Sons #1
Huerfano, CO
Low Hazard 25 ftFrequently Asked Questions
What is the hazard classification of Wright - Brink?
Wright - Brink is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Wright - Brink?
Wright - Brink is owned by TRAVIS CRAWFORD (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Wright - Brink?
Wright - Brink serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Wright - Brink?
Wright - Brink has a dam height of 33 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Wright - Brink last inspected?
Wright - Brink was last inspected on September 9, 2013. Inspection dates indicate when a formal review occurred, not the results of that inspection.