Wilson Millpond Dam

JUMPING RUN CREEK· Richland, South Carolina· Built 1960· 15 ft tall
Low Hazard Recreation Private

Key Takeaway

Wilson Millpond Dam is classified as low hazard in South Carolina. It was completed in 1960 and is 66 years old. Its primary use is recreation.

Physical Details

Dam Height 15 ft (taller than 23.6% in SC)
Max Storage134 acre-ft
Normal Storage72 acre-ft
Surface Area20 acres
Year Completed1960 (66 years old)
NID IDSC00059

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: Yes
Last Inspection: February 17, 2017
State Regulated: Yes
Regulatory Agency: SC DHEC

Ownership

A&J WILSON MILL LLC

Private

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Wilson Millpond Dam?

Wilson Millpond Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Wilson Millpond Dam?

Wilson Millpond Dam is owned by A&J WILSON MILL LLC (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Wilson Millpond Dam built?

Wilson Millpond Dam was completed in 1960, making it 66 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Wilson Millpond Dam?

Wilson Millpond Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Wilson Millpond Dam?

Wilson Millpond Dam has a dam height of 15 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Wilson Millpond Dam last inspected?

Wilson Millpond Dam was last inspected on February 17, 2017. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.