Wilkie Intake Reservoir Dam
Key Takeaway
Wilkie Intake Reservoir Dam is classified as significant hazard in New York. It was completed in 1914 and is 112 years old. Its primary use is water supply. Significant hazard means failure could cause economic or environmental damage. Learn more.
Physical Details
| Dam Height | 34 ft (taller than 83% in NY) |
| Dam Length | 372 ft |
| Dam Type | Concrete |
| Max Storage | 4 acre-ft |
| Normal Storage | 3 acre-ft |
| Surface Area | 1 acres |
| Year Completed | 1914 (112 years old) |
| NID ID | NY13687 |
Safety Information
No probable loss of human life, but can cause economic loss, environmental damage, or disruption of lifeline facilities.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
CITY OF GLENS FALLS
Local Government
Nearby Dams
Butler Storage Reservoir Dam
Warren, NY
High Hazard 83 ftButler Pond Dam
Warren, NY
Significant Hazard 15 ftKeenan Reservoir Dam
Warren, NY
High Hazard 30 ftWilkie Reservoir Dam
Warren, NY
High Hazard 34 ftHalfway Brook Reservoir Dam
Warren, NY
Significant Hazard 28 ftLake Forest Dam
Warren, NY
Low Hazard 12 ftLake Vanare Dam
Warren, NY
Low Hazard 8 ftSherman Island
Warren, NY
High Hazard 80 ftFrequently Asked Questions
What is the hazard classification of Wilkie Intake Reservoir Dam?
Wilkie Intake Reservoir Dam is classified as Significant Hazard. No probable loss of human life, but can cause economic loss, environmental damage, or disruption of lifeline facilities. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Wilkie Intake Reservoir Dam?
Wilkie Intake Reservoir Dam is owned by CITY OF GLENS FALLS (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Wilkie Intake Reservoir Dam built?
Wilkie Intake Reservoir Dam was completed in 1914, making it 112 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Wilkie Intake Reservoir Dam?
Wilkie Intake Reservoir Dam serves the following purposes: Water Supply. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Wilkie Intake Reservoir Dam?
Wilkie Intake Reservoir Dam has a dam height of 34 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Wilkie Intake Reservoir Dam last inspected?
Wilkie Intake Reservoir Dam was last inspected on July 22, 2020. Inspection dates indicate when a formal review occurred, not the results of that inspection.