White and Beason Dam
Key Takeaway
White and Beason Dam is classified as low hazard in North Carolina. It was completed in 1987 and is 39 years old. Its primary use is fire protection.
Physical Details
| Dam Length | 205 ft |
| Dam Type | Earth |
| Max Storage | 18 acre-ft |
| Normal Storage | 12 acre-ft |
| Surface Area | 2 acres |
| Year Completed | 1987 (39 years old) |
| NID ID | NC02122 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
J-Four Farms, LLC
Private
Nearby Dams
Lake Hollifield Dam
Cleveland, NC
High HazardMount Pleasant Fishing Lake Dam
Cleveland, NC
Significant HazardLake Houser Dam
Cleveland, NC
Significant HazardCliffside Active Ash Basin Downstream Dam
Cleveland, NC
High HazardCliffside Retention Basin Dam
Cleveland, NC
High HazardCliffside Active Ash Basin Upstream Dam
Cleveland, NC
High HazardCone Mills Dam
Rutherford, NC
Low HazardCliffside Inactive Ash Basin #5 Saddle Dam
Rutherford, NC
High HazardFrequently Asked Questions
What is the hazard classification of White and Beason Dam?
White and Beason Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates White and Beason Dam?
White and Beason Dam is owned by J-Four Farms, LLC (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was White and Beason Dam built?
White and Beason Dam was completed in 1987, making it 39 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of White and Beason Dam?
White and Beason Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
When was White and Beason Dam last inspected?
White and Beason Dam was last inspected on December 8, 2021. Inspection dates indicate when a formal review occurred, not the results of that inspection.