Wellington Reservoir No. 2 Dam

TRIBUTARY TO CHARLEMONT CREEK· Lorain, Ohio· Built 1928· Earth· 25 ft tall
Significant Hazard Recreation Local Government

Key Takeaway

Wellington Reservoir No. 2 Dam is classified as significant hazard in Ohio. It was completed in 1928 and is 98 years old. Its primary use is recreation. Significant hazard means failure could cause economic or environmental damage. Learn more.

Physical Details

Dam Height 25 ft (taller than 42.1% in OH)
Dam Length600 ft
Dam TypeEarth
Max Storage275 acre-ft
Normal Storage182 acre-ft
Surface Area25 acres
Drainage Area2 sq mi
Max Discharge210 cfs
Year Completed1928 (98 years old)
NID IDOH00759

Safety Information

Significant Hazard

No probable loss of human life, but can cause economic loss, environmental damage, or disruption of lifeline facilities.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: Yes
Last Inspection: October 2, 2018
State Regulated: Yes
Regulatory Agency: Department of Natural Resources

Ownership

Village of Wellington

Local Government

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Wellington Reservoir No. 2 Dam?

Wellington Reservoir No. 2 Dam is classified as Significant Hazard. No probable loss of human life, but can cause economic loss, environmental damage, or disruption of lifeline facilities. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Wellington Reservoir No. 2 Dam?

Wellington Reservoir No. 2 Dam is owned by Village of Wellington (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Wellington Reservoir No. 2 Dam built?

Wellington Reservoir No. 2 Dam was completed in 1928, making it 98 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Wellington Reservoir No. 2 Dam?

Wellington Reservoir No. 2 Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Wellington Reservoir No. 2 Dam?

Wellington Reservoir No. 2 Dam has a dam height of 25 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Wellington Reservoir No. 2 Dam last inspected?

Wellington Reservoir No. 2 Dam was last inspected on October 2, 2018. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.