Warrior Ridge

Juniata River· Huntingdon, Pennsylvania· Built 1906· Buttress· 27 ft tall
Low Hazard Hydroelectric Private

Key Takeaway

Warrior Ridge is classified as low hazard in Pennsylvania. It was completed in 1906 and is 120 years old. Its primary use is hydroelectric.

Physical Details

Dam Height 27 ft (taller than 60.1% in PA)
Dam Length810 ft
Dam TypeButtress
Max Storage400 acre-ft
Normal Storage400 acre-ft
Surface Area65 acres
Drainage Area837 sq mi
Max Discharge65,250 cfs
Year Completed1906 (120 years old)
NID IDPA00433

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: May 30, 2018
State Regulated: No

Ownership

American Hydro Power Company

Private

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Warrior Ridge?

Warrior Ridge is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Warrior Ridge?

Warrior Ridge is owned by American Hydro Power Company (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Warrior Ridge built?

Warrior Ridge was completed in 1906, making it 120 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Warrior Ridge?

Warrior Ridge serves the following purposes: Hydroelectric. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Warrior Ridge?

Warrior Ridge has a dam height of 27 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Warrior Ridge last inspected?

Warrior Ridge was last inspected on May 30, 2018. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.