Wallace Dam
Key Takeaway
Wallace Dam is classified as high hazard in Kansas. Its primary use is fire protection. High hazard means loss of life is likely if the dam fails — it does not indicate the dam's current condition. Learn more.
Physical Details
| Dam Height | 31 ft (taller than 76.4% in KS) |
| Dam Length | 410 ft |
| Max Storage | 51 acre-ft |
| Normal Storage | 25 acre-ft |
| Surface Area | 3 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 539 cfs |
| NID ID | KS02672 |
Safety Information
Loss of human life is likely if the dam fails.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
COMPASS COMMODITY GROUP 300 LLC
Private
Nearby Dams
Dam KS02688
Wyandotte, KS
Low Hazard 27 ftCastle Parks Dam
Wyandotte, KS
High Hazard 23 ftMellott Timberlake Dam
Wyandotte, KS
High Hazard 29 ftWilcox Dam
Wyandotte, KS
Significant Hazard 51 ftDam KS02993
Wyandotte, KS
Low Hazard 26 ftInternational Speedway
Wyandotte, KS
High Hazard 35 ftDam KS02683
Wyandotte, KS
Low Hazard 27 ftInternational Speedway
Wyandotte, KS
High Hazard 35 ftFrequently Asked Questions
What is the hazard classification of Wallace Dam?
Wallace Dam is classified as High Hazard. Loss of human life is likely if the dam fails. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Wallace Dam?
Wallace Dam is owned by COMPASS COMMODITY GROUP 300 LLC (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Wallace Dam?
Wallace Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Wallace Dam?
Wallace Dam has a dam height of 31 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Wallace Dam last inspected?
Wallace Dam was last inspected on December 19, 2012. Inspection dates indicate when a formal review occurred, not the results of that inspection.