Walkerville
Key Takeaway
Walkerville is classified as low hazard in Montana. It was completed in 1939 and is 87 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 21 ft (taller than 61.7% in MT) |
| Dam Length | 300 ft |
| Dam Type | Earth |
| Max Storage | 181 acre-ft |
| Normal Storage | 43 acre-ft |
| Drainage Area | 31 sq mi |
| Max Discharge | 1,000 cfs |
| Year Completed | 1939 (87 years old) |
| NID ID | MT03105 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
HAGLIN RANCH
Private
Nearby Dams
Frady #1 (Mccone)
McCone, MT
Low Hazard 20 ftHedstorm Reservoir
McCone, MT
Low Hazard 24 ftGibbs, Gerold
Garfield, MT
Low Hazard 21 ftHannaland Reservoir
McCone, MT
Low Hazard 20 ftHannaland #1
McCone, MT
Low Hazard 25 ftMurphy and Sons #2
McCone, MT
Low Hazard 10 ftFrady #3
McCone, MT
Low Hazard 15 ftMurphy #2
McCone, MT
Low Hazard 12 ftFrequently Asked Questions
What is the hazard classification of Walkerville?
Walkerville is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Walkerville?
Walkerville is owned by HAGLIN RANCH (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Walkerville built?
Walkerville was completed in 1939, making it 87 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Walkerville?
Walkerville serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Walkerville?
Walkerville has a dam height of 21 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.