Vinson Impound No.2 Dam
Key Takeaway
Vinson Impound No.2 Dam is classified as low hazard in Georgia.
Physical Details
| Dam Height | 48 ft (taller than 95.4% in GA) |
| Dam Length | 1,170 ft |
| Dam Type | Earth |
| Max Storage | 400 acre-ft |
| Normal Storage | 0 acre-ft |
| Surface Area | 11 acres |
| Drainage Area | 0 sq mi |
| NID ID | GA06963 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Basf Catalyst Llc
Private
Nearby Dams
Vinson Impound No. 3 Dam
Wilkinson, GA
Low Hazard 49 ftVinson Impound # 1 Dam
Wilkinson, GA
High Hazard 44 ftEngelhard Holliman # 1 Finishing Pond Dam
Wilkinson, GA
Low Hazard 18 ftEngelhard Job Tailings Pond (Lower) Dam
Wilkinson, GA
Low Hazard 27 ftEngelhard Trapnell # 1 A Plant Tailings Impoundment
Wilkinson, GA
Low Hazard 27 ftEngelhard Trapnell # 1 Plant Tailings Pond
Wilkinson, GA
Low Hazard 23 ftReject Pond Dam No. 5
Wilkinson, GA
Low Hazard 31 ftEngelhard Trapnell # 2 Plant Tailings Impoundment
Wilkinson, GA
Low Hazard 40 ftFrequently Asked Questions
What is the hazard classification of Vinson Impound No.2 Dam?
Vinson Impound No.2 Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Vinson Impound No.2 Dam?
Vinson Impound No.2 Dam is owned by Basf Catalyst Llc (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
How tall is Vinson Impound No.2 Dam?
Vinson Impound No.2 Dam has a dam height of 48 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Vinson Impound No.2 Dam last inspected?
Vinson Impound No.2 Dam was last inspected on October 1, 2006. Inspection dates indicate when a formal review occurred, not the results of that inspection.