Villa Hills
Key Takeaway
Villa Hills is classified as low hazard in Kentucky. Its primary use is recreation.
Physical Details
| Dam Height | 27 ft (taller than 37.3% in KY) |
| Dam Length | 250 ft |
| Dam Type | Earth |
| Max Storage | 115 acre-ft |
| Surface Area | 3 acres |
| Drainage Area | 0 sq mi |
| NID ID | KY01040 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
VILLA HILLS CIVIC CLUB
Private
Nearby Dams
Prospect Point Dam
Kenton, KY
Significant Hazard 45 ftUpper County Squire Dam
Kenton, KY
High Hazard 35 ftLower County Squire Dam
Kenton, KY
High Hazard 39 ftMarydale Dam
Boone, KY
Significant Hazard 32 ftLatonia Race Track Dam
Boone, KY
Significant Hazard 38 ftCity of Fort Wright Dam
Kenton, KY
Significant Hazard 39 ftKytc Bioretention Dam
Kenton, KY
High Hazard 44 ftAmsterdam Valley Retention Basin Dam
Kenton, KY
High Hazard 30 ftFrequently Asked Questions
What is the hazard classification of Villa Hills?
Villa Hills is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Villa Hills?
Villa Hills is owned by VILLA HILLS CIVIC CLUB (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Villa Hills?
Villa Hills serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Villa Hills?
Villa Hills has a dam height of 27 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Villa Hills last inspected?
Villa Hills was last inspected on April 2, 2015. Inspection dates indicate when a formal review occurred, not the results of that inspection.