Tyler Dam
Key Takeaway
Tyler Dam is classified as low hazard in South Dakota. It was completed in 1996 and is 30 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 34 ft (taller than 93.1% in SD) |
| Dam Type | Earth |
| Max Storage | 90 acre-ft |
| Normal Storage | 60 acre-ft |
| Drainage Area | 2 sq mi |
| Max Discharge | 935 cfs |
| Year Completed | 1996 (30 years old) |
| Year Modified | 2009 |
| NID ID | SD02623 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Larry Tyler
Private
Nearby Dams
Medenwald Wpa
Marshall, SD
Low Hazard 13 ftRinger Wpa
Marshall, SD
Low Hazard 10 ftBien Dam No. 2
Marshall, SD
Low Hazard 9 ftBien Dam
Marshall, SD
Low Hazard 17 ftAnderson East Dam
Marshall, SD
Low Hazard 24 ftTewaukon WS T-2
Sargent, ND
Low Hazard 37 ftSamuel Berger Memorial Dam
Marshall, SD
Low Hazard 7 ftWild Rice Creek No. 3
Marshall, SD
Low Hazard 66 ftFrequently Asked Questions
What is the hazard classification of Tyler Dam?
Tyler Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Tyler Dam?
Tyler Dam is owned by Larry Tyler (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Tyler Dam built?
Tyler Dam was completed in 1996, making it 30 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Tyler Dam?
Tyler Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Tyler Dam?
Tyler Dam has a dam height of 34 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.