Texaco INC. Maysville Gas Process Plt
Key Takeaway
Texaco INC. Maysville Gas Process Plt is classified as low hazard in Oklahoma. It was completed in 1960 and is 66 years old. Its primary use is other.
Physical Details
| Dam Height | 22 ft (taller than 19.9% in OK) |
| Dam Length | 400 ft |
| Dam Type | Earth |
| Max Storage | 75 acre-ft |
| Normal Storage | 40 acre-ft |
| Surface Area | 5 acres |
| Max Discharge | 800 cfs |
| Year Completed | 1960 (66 years old) |
| NID ID | OK21138 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
TEXACO INC MAYSVILLE PLT
Private
Nearby Dams
Texaco INC. Maysville Gas Process Plt
Garvin, OK
Low Hazard 23 ftSCS-Rush Creek Site-034
Garvin, OK
Low Hazard 30 ftRichardson Gss No.1
Garvin, OK
Low Hazard 35 ftSCS-Rush Creek Site-035
Garvin, OK
Low Hazard 33 ftOknoname 049010
Garvin, OK
Low Hazard 20 ftTerry Gss No.1
Garvin, OK
Low Hazard 28 ftRichard Hill Gss #1
Garvin, OK
Low Hazard 38 ftSCS-Wildhorse Creek Site-102
Garvin, OK
Low Hazard 31 ftFrequently Asked Questions
What is the hazard classification of Texaco INC. Maysville Gas Process Plt?
Texaco INC. Maysville Gas Process Plt is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Texaco INC. Maysville Gas Process Plt?
Texaco INC. Maysville Gas Process Plt is owned by TEXACO INC MAYSVILLE PLT (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Texaco INC. Maysville Gas Process Plt built?
Texaco INC. Maysville Gas Process Plt was completed in 1960, making it 66 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Texaco INC. Maysville Gas Process Plt?
Texaco INC. Maysville Gas Process Plt serves the following purposes: Other. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Texaco INC. Maysville Gas Process Plt?
Texaco INC. Maysville Gas Process Plt has a dam height of 22 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Texaco INC. Maysville Gas Process Plt last inspected?
Texaco INC. Maysville Gas Process Plt was last inspected on May 5, 2010. Inspection dates indicate when a formal review occurred, not the results of that inspection.