Teter Dam
Key Takeaway
Teter Dam is classified as low hazard in Missouri. It was completed in 1998 and is 28 years old. Its primary use is grade stabilization.
Physical Details
| Dam Height | 29 ft (taller than 59.6% in MO) |
| Dam Length | 440 ft |
| Dam Type | Earth |
| Max Storage | 35 acre-ft |
| Normal Storage | 24 acre-ft |
| Surface Area | 5 acres |
| Drainage Area | 160 sq mi |
| Max Discharge | 4 cfs |
| Year Completed | 1998 (28 years old) |
| NID ID | MO50783 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
FLOYD TETER
Private
Nearby Dams
Keota Lake Dam
Macon, MO
Low Hazard 15 ftPaul Isaacson Dam
Macon, MO
Low Hazard 29 ftBee Veer Mine Dam
Macon, MO
Significant Hazard 60 ftCerva Dam
Macon, MO
Low Hazard 26 ftJeff Emanual Dam
Macon, MO
Low Hazard 25 ftCentral Coal&Coke Corp Lake Dam
Macon, MO
Low Hazard 15 ftHenry Dam
Macon, MO
Low Hazard 30 ftBuswell Dam
Macon, MO
Low Hazard 27 ftFrequently Asked Questions
What is the hazard classification of Teter Dam?
Teter Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Teter Dam?
Teter Dam is owned by FLOYD TETER (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Teter Dam built?
Teter Dam was completed in 1998, making it 28 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Teter Dam?
Teter Dam serves the following purposes: Grade Stabilization. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Teter Dam?
Teter Dam has a dam height of 29 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.