Paul Isaacson Dam

TR-MIDDLE FORK CHARITON RIVER· Macon, Missouri· Built 2000· Earth· 29 ft tall

Key Takeaway

Paul Isaacson Dam is classified as low hazard in Missouri. It was completed in 2000 and is 26 years old. Its primary use is fire protection.

Physical Details

Dam Height 29 ft (taller than 59.6% in MO)
Dam Length310 ft
Dam TypeEarth
Max Storage34 acre-ft
Normal Storage21 acre-ft
Surface Area10 acres
Drainage Area95 sq mi
Max Discharge60 cfs
Year Completed2000 (26 years old)
NID IDMO50968

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: November 1, 2000
State Regulated: No

Ownership

PAUL ISAACSON

Private

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Paul Isaacson Dam?

Paul Isaacson Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Paul Isaacson Dam?

Paul Isaacson Dam is owned by PAUL ISAACSON (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Paul Isaacson Dam built?

Paul Isaacson Dam was completed in 2000, making it 26 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Paul Isaacson Dam?

Paul Isaacson Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Paul Isaacson Dam?

Paul Isaacson Dam has a dam height of 29 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Paul Isaacson Dam last inspected?

Paul Isaacson Dam was last inspected on November 1, 2000. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.