Teds Reservoir
Key Takeaway
Teds Reservoir is classified as low hazard in Montana. It was completed in 1949 and is 77 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 15 ft (taller than 18.8% in MT) |
| Dam Length | 110 ft |
| Dam Type | Earth |
| Max Storage | 101 acre-ft |
| Normal Storage | 40 acre-ft |
| Year Completed | 1949 (77 years old) |
| NID ID | MT02501 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
LYLE E QUARTER CIRCLE INC
Private
Nearby Dams
Game Reservoir
McCone, MT
Low Hazard 12 ftLyle Nelson #7
McCone, MT
Low Hazard 14 ftThora #2
McCone, MT
Low Hazard 17 ftNelson #1
McCone, MT
Significant Hazard 20 ftMargaret Hays #1
McCone, MT
Low Hazard 24 ftNelson #2
McCone, MT
Low Hazard 15 ftChristianson
McCone, MT
Low Hazard 29 ftCrow #2
McCone, MT
Significant Hazard 30 ftFrequently Asked Questions
What is the hazard classification of Teds Reservoir?
Teds Reservoir is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Teds Reservoir?
Teds Reservoir is owned by LYLE E QUARTER CIRCLE INC (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Teds Reservoir built?
Teds Reservoir was completed in 1949, making it 77 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Teds Reservoir?
Teds Reservoir serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Teds Reservoir?
Teds Reservoir has a dam height of 15 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.