Taylor Reservoir

BIG HONEY CREEK & OTHERS· Lake, Oregon· Built 1985· Earth· 33 ft tall
Low Hazard Irrigation Private

Key Takeaway

Taylor Reservoir is classified as low hazard in Oregon. It was completed in 1985 and is 41 years old. Its primary use is irrigation.

Physical Details

Dam Height 33 ft (taller than 66.3% in OR)
Dam Length1,000 ft
Dam TypeEarth
Max Storage300 acre-ft
Normal Storage300 acre-ft
Surface Area36 acres
Drainage Area6 sq mi
Max Discharge26 cfs
Year Completed1985 (41 years old)
NID IDOR00701

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: August 5, 2011
State Regulated: Yes
Regulatory Agency: OWRD

Ownership

NEIL TAYLOR

Private

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Taylor Reservoir?

Taylor Reservoir is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Taylor Reservoir?

Taylor Reservoir is owned by NEIL TAYLOR (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Taylor Reservoir built?

Taylor Reservoir was completed in 1985, making it 41 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Taylor Reservoir?

Taylor Reservoir serves the following purposes: Irrigation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Taylor Reservoir?

Taylor Reservoir has a dam height of 33 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Taylor Reservoir last inspected?

Taylor Reservoir was last inspected on August 5, 2011. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.