Taylor Dam
Key Takeaway
Taylor Dam is classified as low hazard in Oklahoma. It was completed in 1965 and is 61 years old. Its primary use is recreation.
Physical Details
| Dam Height | 50 ft (taller than 94.2% in OK) |
| Dam Length | 500 ft |
| Dam Type | Earth |
| Max Storage | 450 acre-ft |
| Normal Storage | 28 acre-ft |
| Surface Area | 7 acres |
| Max Discharge | 300 cfs |
| Year Completed | 1965 (61 years old) |
| NID ID | OK12622 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
TULSA COUNTY
Local Government
Nearby Dams
Oknoname 30236
Tulsa, OK
Low Hazard 18 ftQuay Joe
Tulsa, OK
Low Hazard 25 ftOknoname 143006
Tulsa, OK
Low Hazard 25 ftSand Springs Lake
Tulsa, OK
Low Hazard 36 ftParthenia No.3
Creek, OK
Low Hazard 15 ftParthenia No.2
Creek, OK
Low Hazard 45 ftParthenia Lake
Creek, OK
High Hazard 28 ftSand Springs Municipal
Osage, OK
Significant Hazard 30 ftFrequently Asked Questions
What is the hazard classification of Taylor Dam?
Taylor Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Taylor Dam?
Taylor Dam is owned by TULSA COUNTY (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Taylor Dam built?
Taylor Dam was completed in 1965, making it 61 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Taylor Dam?
Taylor Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Taylor Dam?
Taylor Dam has a dam height of 50 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Taylor Dam last inspected?
Taylor Dam was last inspected on December 15, 2010. Inspection dates indicate when a formal review occurred, not the results of that inspection.