Taylor Dam (Aka-Ferguson Dam)
Key Takeaway
Taylor Dam (Aka-Ferguson Dam) is classified as significant hazard in Kansas. It was completed in 1972 and is 54 years old. Its primary use is fire protection. Significant hazard means failure could cause economic or environmental damage. Learn more.
Physical Details
| Dam Height | 26 ft (taller than 50.5% in KS) |
| Dam Length | 700 ft |
| Dam Type | Earth |
| Max Storage | 179 acre-ft |
| Normal Storage | 86 acre-ft |
| Surface Area | 12 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 1,024 cfs |
| Year Completed | 1972 (54 years old) |
| Year Modified | 2020 |
| NID ID | KS00683 |
Safety Information
No probable loss of human life, but can cause economic loss, environmental damage, or disruption of lifeline facilities.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
TAYLOR, LINDA
Private
Nearby Dams
Dam KS02931
Franklin, KS
Low Hazard 26 ftDam KS04448
Franklin, KS
Low Hazard 27 ftDam KS02933
Franklin, KS
Low Hazard 22 ftDam KS02939
Franklin, KS
Low Hazard 21 ftDam KS04456
Franklin, KS
Low Hazard 18 ftDam KS04452
Franklin, KS
Low Hazard 22 ftTimber Lake Ranch Dam No. 2
Franklin, KS
Low Hazard 30 ftDam KS04453
Franklin, KS
Low Hazard 24 ftFrequently Asked Questions
What is the hazard classification of Taylor Dam (Aka-Ferguson Dam)?
Taylor Dam (Aka-Ferguson Dam) is classified as Significant Hazard. No probable loss of human life, but can cause economic loss, environmental damage, or disruption of lifeline facilities. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Taylor Dam (Aka-Ferguson Dam)?
Taylor Dam (Aka-Ferguson Dam) is owned by TAYLOR, LINDA (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Taylor Dam (Aka-Ferguson Dam) built?
Taylor Dam (Aka-Ferguson Dam) was completed in 1972, making it 54 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Taylor Dam (Aka-Ferguson Dam)?
Taylor Dam (Aka-Ferguson Dam) serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Taylor Dam (Aka-Ferguson Dam)?
Taylor Dam (Aka-Ferguson Dam) has a dam height of 26 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Taylor Dam (Aka-Ferguson Dam) last inspected?
Taylor Dam (Aka-Ferguson Dam) was last inspected on November 9, 2020. Inspection dates indicate when a formal review occurred, not the results of that inspection.