Talawanda No. 1

TR-COAL CR· Pittsburg, Oklahoma· Built 1902· 38 ft tall
Low Hazard Water Supply Local Government

Key Takeaway

Talawanda No. 1 is classified as low hazard in Oklahoma. It was completed in 1902 and is 124 years old. Its primary use is water supply.

Physical Details

Dam Height 38 ft (taller than 80.3% in OK)
Dam Length700 ft
Max Storage1.6K acre-ft
Normal Storage1.2K acre-ft
Surface Area91 acres
Max Discharge10,440 cfs
Year Completed1902 (124 years old)
NID IDOK01341

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: May 31, 2011
State Regulated: Yes
Regulatory Agency: OWRB

Ownership

City of Mcalester

Local Government

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Talawanda No. 1?

Talawanda No. 1 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Talawanda No. 1?

Talawanda No. 1 is owned by City of Mcalester (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Talawanda No. 1 built?

Talawanda No. 1 was completed in 1902, making it 124 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Talawanda No. 1?

Talawanda No. 1 serves the following purposes: Water Supply. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Talawanda No. 1?

Talawanda No. 1 has a dam height of 38 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Talawanda No. 1 last inspected?

Talawanda No. 1 was last inspected on May 31, 2011. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.