Sumners Lake Dam
Key Takeaway
Sumners Lake Dam is classified as low hazard in Georgia. Its primary use is recreation.
Physical Details
| Dam Height | 8 ft (taller than 0.9% in GA) |
| Dam Length | 300 ft |
| Dam Type | Earth |
| Max Storage | 115 acre-ft |
| Normal Storage | 61 acre-ft |
| Surface Area | 35 acres |
| NID ID | GA04809 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Sumners, Timothy & Thomas
Private
Nearby Dams
Southpoint Plantation Lake Dam
Terrell, GA
Low Hazard 18 ftOak Hill Farms Lake Dam
Lee, GA
Low Hazard 7 ftMossey Dell Lake Dam South
Lee, GA
Low Hazard 14 ftMcgill Lake Dam
Terrell, GA
Low Hazard 13 ftPhil Hajek Irrigation Dam
Lee, GA
Low Hazard 23 ftMossy Dell Lake Dam North
Lee, GA
Low Hazard 15 ftHajek Pond Dam
Lee, GA
Unknown 22 ftLake Holiday Dam
Lee, GA
Low Hazard 15 ftFrequently Asked Questions
What is the hazard classification of Sumners Lake Dam?
Sumners Lake Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Sumners Lake Dam?
Sumners Lake Dam is owned by Sumners, Timothy & Thomas (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Sumners Lake Dam?
Sumners Lake Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Sumners Lake Dam?
Sumners Lake Dam has a dam height of 8 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Sumners Lake Dam last inspected?
Sumners Lake Dam was last inspected on June 2, 2016. Inspection dates indicate when a formal review occurred, not the results of that inspection.