Sulphur Springs Draw Dam

SULPHUR SPRINGS DRAW· Martin, Texas· Built 1993· Earth· 33 ft tall
High Hazard Tailings Other Local Government

Key Takeaway

Sulphur Springs Draw Dam is classified as high hazard in Texas. It was completed in 1993 and is 33 years old. Its primary use is tailings. High hazard means loss of life is likely if the dam fails — it does not indicate the dam's current condition. Learn more.

Physical Details

Dam Height 33 ft (taller than 74.3% in TX)
Dam Length4,787 ft
Dam TypeEarth
Max Storage20.7K acre-ft
Normal Storage8.0K acre-ft
Surface Area970 acres
Drainage Area258 sq mi
Max Discharge210,870 cfs
Year Completed1993 (33 years old)
NID IDTX06482

Safety Information

High Hazard

Loss of human life is likely if the dam fails.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: Yes
Last Inspection: December 19, 2018
State Regulated: Yes
Regulatory Agency: TCEQ

Ownership

COLORADO RIVER MUNICIPAL WATER DISTRICT

Local Government

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Sulphur Springs Draw Dam?

Sulphur Springs Draw Dam is classified as High Hazard. Loss of human life is likely if the dam fails. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Sulphur Springs Draw Dam?

Sulphur Springs Draw Dam is owned by COLORADO RIVER MUNICIPAL WATER DISTRICT (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Sulphur Springs Draw Dam built?

Sulphur Springs Draw Dam was completed in 1993, making it 33 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Sulphur Springs Draw Dam?

Sulphur Springs Draw Dam serves the following purposes: Tailings, Other. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Sulphur Springs Draw Dam?

Sulphur Springs Draw Dam has a dam height of 33 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Sulphur Springs Draw Dam last inspected?

Sulphur Springs Draw Dam was last inspected on December 19, 2018. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.