Stroobants Dam
Key Takeaway
Stroobants Dam is classified as high hazard in Virginia. Its primary use is recreation. High hazard means loss of life is likely if the dam fails — it does not indicate the dam's current condition. Learn more.
Physical Details
| Dam Height | 34 ft (taller than 78.3% in VA) |
| Dam Length | 323 ft |
| Dam Type | Earth |
| Max Storage | 255 acre-ft |
| Surface Area | 18 acres |
| Drainage Area | 2 sq mi |
| NID ID | VA019083 |
Safety Information
Loss of human life is likely if the dam fails.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Maria H. Stroobants
Private
Nearby Dams
Delaware Properties Dam
Bedford, VA
Unknown 32 ftTpd Enterprises
Bedford, VA
Unknown 25 ftDemasters Dam
Bedford, VA
Unknown 27 ftCrowder Dam
Bedford, VA
Unknown 23 ftLondon Downs Dam
Bedford, VA
Unknown 23 ftOtter River Raw Water Terminal Reservoir Dam
Campbell, VA
High Hazard 42 ftBryan Dam
Bedford, VA
Unknown 30 ftJames M. Stephens Dam
Bedford, VA
Significant Hazard 27 ftFrequently Asked Questions
What is the hazard classification of Stroobants Dam?
Stroobants Dam is classified as High Hazard. Loss of human life is likely if the dam fails. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Stroobants Dam?
Stroobants Dam is owned by Maria H. Stroobants (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Stroobants Dam?
Stroobants Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Stroobants Dam?
Stroobants Dam has a dam height of 34 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Stroobants Dam last inspected?
Stroobants Dam was last inspected on January 21, 2016. Inspection dates indicate when a formal review occurred, not the results of that inspection.