Stewart Lake Dam
Key Takeaway
Stewart Lake Dam is classified as significant hazard in Texas. It was completed in 1958 and is 68 years old. Its primary use is irrigation. Significant hazard means failure could cause economic or environmental damage. Learn more.
Physical Details
| Dam Height | 29 ft (taller than 64.3% in TX) |
| Dam Length | 1,000 ft |
| Dam Type | Earth |
| Max Storage | 518 acre-ft |
| Normal Storage | 188 acre-ft |
| Surface Area | 35 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 2,085 cfs |
| Year Completed | 1958 (68 years old) |
| NID ID | TX00111 |
Safety Information
No probable loss of human life, but can cause economic loss, environmental damage, or disruption of lifeline facilities.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
RISHER RANDALL
Private
Nearby Dams
Rampy Lake Dam
Montgomery, TX
Low Hazard 23 ftCape Conroe Dam 1
Montgomery, TX
High Hazard 24 ftPerfection Lake Dam
Montgomery, TX
High Hazard 24 ftTri-Lakes Estates Dam 1
Montgomery, TX
High Hazard 21 ftLake Lorraine Dam
Montgomery, TX
Low Hazard 22 ftPine Lake Dam
Montgomery, TX
Significant Hazard 19 ftOld Lake 177 Dam
Montgomery, TX
High Hazard 15 ftOld Trailway Lake Dam
Montgomery, TX
Low Hazard 14 ftFrequently Asked Questions
What is the hazard classification of Stewart Lake Dam?
Stewart Lake Dam is classified as Significant Hazard. No probable loss of human life, but can cause economic loss, environmental damage, or disruption of lifeline facilities. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Stewart Lake Dam?
Stewart Lake Dam is owned by RISHER RANDALL (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Stewart Lake Dam built?
Stewart Lake Dam was completed in 1958, making it 68 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Stewart Lake Dam?
Stewart Lake Dam serves the following purposes: Irrigation, Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Stewart Lake Dam?
Stewart Lake Dam has a dam height of 29 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Stewart Lake Dam last inspected?
Stewart Lake Dam was last inspected on December 8, 2021. Inspection dates indicate when a formal review occurred, not the results of that inspection.