Stephens Lake Dam
Key Takeaway
Stephens Lake Dam is classified as low hazard in Georgia. Its primary use is recreation.
Physical Details
| Dam Height | 12 ft (taller than 9.4% in GA) |
| Dam Length | 360 ft |
| Dam Type | Earth |
| Max Storage | 292 acre-ft |
| Normal Storage | 112 acre-ft |
| Surface Area | 32 acres |
| Drainage Area | 1,850 sq mi |
| NID ID | GA04317 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Mr. Jonas Jennings
Private
Nearby Dams
Willow Pond Dam
Fayette, GA
Low Hazard 9 ftAmberlake Dam
Fayette, GA
Low Hazard 28 ftFayetteville Reservoir Dam
Fayette, GA
Unknown 23 ftWellborn Lake Dam
Fayette, GA
Unknown 22 ftLakeside At Redwine
Fayette, GA
Unknown 34 ftLake Edith Dam
Fayette, GA
Low Hazard 26 ftMccord Lake Dam
Fayette, GA
Low Hazard 21 ftGrinages Lake Dam
Fayette, GA
Low Hazard 27 ftFrequently Asked Questions
What is the hazard classification of Stephens Lake Dam?
Stephens Lake Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Stephens Lake Dam?
Stephens Lake Dam is owned by Mr. Jonas Jennings (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Stephens Lake Dam?
Stephens Lake Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Stephens Lake Dam?
Stephens Lake Dam has a dam height of 12 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Stephens Lake Dam last inspected?
Stephens Lake Dam was last inspected on May 7, 2015. Inspection dates indicate when a formal review occurred, not the results of that inspection.