Standing Pine Watershed Structure 9 Dam
Key Takeaway
Standing Pine Watershed Structure 9 Dam is classified as low hazard in Mississippi. It was completed in 1969 and is 57 years old. Its primary use is flood risk reduction.
Physical Details
| Dam Height | 24 ft (taller than 75.8% in MS) |
| Dam Type | Earth |
| Max Storage | 2.5K acre-ft |
| Drainage Area | 5 sq mi |
| Year Completed | 1969 (57 years old) |
| NID ID | MS00679 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Local Government
Nearby Dams
J E Upton Jr Catfish Pond Dam
Leake, MS
Low Hazard 11 ftW C Majors Pond Dam
Leake, MS
Low Hazard 12 ftMs07122 Lake Dam
Leake, MS
Low Hazard 17 ftStanding Pine Watershed Structure 3 Dam
Leake, MS
Significant Hazard 23 ftJoe Wall Dam
Leake, MS
Low Hazard 16 ftMs06856 Lake Dam
Leake, MS
Unknown 17 ftMs06858 Lake Dam
Leake, MS
Low Hazard 9 ftMs07121 Lake Dam
Leake, MS
Unknown 15 ftFrequently Asked Questions
What is the hazard classification of Standing Pine Watershed Structure 9 Dam?
Standing Pine Watershed Structure 9 Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Standing Pine Watershed Structure 9 Dam?
Standing Pine Watershed Structure 9 Dam is owned by information not available (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Standing Pine Watershed Structure 9 Dam built?
Standing Pine Watershed Structure 9 Dam was completed in 1969, making it 57 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Standing Pine Watershed Structure 9 Dam?
Standing Pine Watershed Structure 9 Dam serves the following purposes: Flood Risk Reduction. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Standing Pine Watershed Structure 9 Dam?
Standing Pine Watershed Structure 9 Dam has a dam height of 24 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Standing Pine Watershed Structure 9 Dam last inspected?
Standing Pine Watershed Structure 9 Dam was last inspected on March 24, 2014. Inspection dates indicate when a formal review occurred, not the results of that inspection.