Sparks
Key Takeaway
Sparks is classified as significant hazard in Oregon. It was completed in 2002 and is 24 years old. Its primary use is irrigation. Significant hazard means failure could cause economic or environmental damage. Learn more.
Physical Details
| Dam Height | 19 ft (taller than 27.8% in OR) |
| Dam Type | Earth |
| Max Storage | 55 acre-ft |
| Normal Storage | 35 acre-ft |
| Year Completed | 2002 (24 years old) |
| NID ID | OR04082 |
Safety Information
No probable loss of human life, but can cause economic loss, environmental damage, or disruption of lifeline facilities.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
STEPHEN SPARKS
Private
Nearby Dams
Gillworth Reservoir
Jefferson, OR
Significant Hazard 29 ftMckenzie Canyon Dam
Deschutes, OR
Significant Hazard 18 ftOpal Springs
Jefferson, OR
Low Hazard 21 ftCyrus Reservoir
Deschutes, OR
Low Hazard 17 ftRedmond Sewage Pond (Lagoon)
Deschutes, OR
Low Hazard 19 ftSquaw Creek Id Reservoir
Deschutes, OR
Low Hazard 18 ftFrequently Asked Questions
What is the hazard classification of Sparks?
Sparks is classified as Significant Hazard. No probable loss of human life, but can cause economic loss, environmental damage, or disruption of lifeline facilities. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Sparks?
Sparks is owned by STEPHEN SPARKS (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Sparks built?
Sparks was completed in 2002, making it 24 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Sparks?
Sparks serves the following purposes: Irrigation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Sparks?
Sparks has a dam height of 19 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.