Soske Dam
Key Takeaway
Soske Dam is classified as low hazard in South Dakota. It was completed in 1935 and is 91 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 12 ft (taller than 3% in SD) |
| Dam Length | 620 ft |
| Dam Type | Earth |
| Max Storage | 53 acre-ft |
| Normal Storage | 36 acre-ft |
| Max Discharge | 1,105 cfs |
| Year Completed | 1935 (91 years old) |
| NID ID | SD01047 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
LLOYD SOSKE
Private
Nearby Dams
Wasserburger Pond
Fall River, SD
Low Hazard 26 ftFishko Dam #3
Fall River, SD
Low Hazard 23 ftJ. Chlecq Dam
Fall River, SD
Low Hazard 26 ftDry Draw Dam
Fall River, SD
Significant Hazard 18 ftMule Creek Dam
Fall River, SD
Low Hazard 24 ftLong Hollow Dam
Fall River, SD
Low Hazard 24 ftDuck Creek Dam No.2
Fall River, SD
Significant Hazard 21 ftFishko Dam #2
Fall River, SD
Low Hazard 28 ftFrequently Asked Questions
What is the hazard classification of Soske Dam?
Soske Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Soske Dam?
Soske Dam is owned by LLOYD SOSKE (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Soske Dam built?
Soske Dam was completed in 1935, making it 91 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Soske Dam?
Soske Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Soske Dam?
Soske Dam has a dam height of 12 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.