Smith Stockwater
Key Takeaway
Smith Stockwater is classified as low hazard in Wyoming. It was completed in 1952 and is 74 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 25 ft (taller than 39.5% in WY) |
| Dam Length | 460 ft |
| Dam Type | Earth |
| Max Storage | 177 acre-ft |
| Normal Storage | 113 acre-ft |
| Surface Area | 11 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 0 cfs |
| Year Completed | 1952 (74 years old) |
| NID ID | WY00306 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
PARKERTON RANCHES
Private
Nearby Dams
Frequently Asked Questions
What is the hazard classification of Smith Stockwater?
Smith Stockwater is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Smith Stockwater?
Smith Stockwater is owned by PARKERTON RANCHES (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Smith Stockwater built?
Smith Stockwater was completed in 1952, making it 74 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Smith Stockwater?
Smith Stockwater serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Smith Stockwater?
Smith Stockwater has a dam height of 25 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Smith Stockwater last inspected?
Smith Stockwater was last inspected on July 15, 2019. Inspection dates indicate when a formal review occurred, not the results of that inspection.