Sieler Dam
Key Takeaway
Sieler Dam is classified as low hazard in South Dakota. It was completed in 1955 and is 71 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 20 ft (taller than 33.7% in SD) |
| Dam Length | 655 ft |
| Dam Type | Earth |
| Max Storage | 90 acre-ft |
| Normal Storage | 60 acre-ft |
| Max Discharge | 690 cfs |
| Year Completed | 1955 (71 years old) |
| NID ID | SD01979 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
PENO FARMS INC.
Private
Nearby Dams
Fortune Dam
Pennington, SD
Low Hazard 15 ftSd Noname 45
Haakon, SD
Low Hazard 16 ftKjerstad Dam No.2
Pennington, SD
High Hazard 14 ftKjerstad Dam No.3
Pennington, SD
High Hazard 15 ftTheodore Kjerstad
Pennington, SD
Low Hazard 17 ftKonrad Kjerstad
Pennington, SD
Low Hazard 20 ftSd Noname 44
Haakon, SD
Low Hazard 12 ftJerry Willuweit
Pennington, SD
Low Hazard 23 ftFrequently Asked Questions
What is the hazard classification of Sieler Dam?
Sieler Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Sieler Dam?
Sieler Dam is owned by PENO FARMS INC. (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Sieler Dam built?
Sieler Dam was completed in 1955, making it 71 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Sieler Dam?
Sieler Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Sieler Dam?
Sieler Dam has a dam height of 20 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.