Serres Dam 2
Key Takeaway
Serres Dam 2 is classified as low hazard in Nebraska. It was completed in 1946 and is 80 years old. Its primary use is irrigation.
Physical Details
| Dam Height | 23 ft (taller than 39.7% in NE) |
| Dam Length | 320 ft |
| Dam Type | Earth |
| Max Storage | 92 acre-ft |
| Normal Storage | 54 acre-ft |
| Surface Area | 8 acres |
| Drainage Area | 1 sq mi |
| Max Discharge | 1,180 cfs |
| Year Completed | 1946 (80 years old) |
| NID ID | NE01098 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Box X Ranch Inc
Private
Nearby Dams
Wickersham Dam
Sioux, NE
Low Hazard 25 ftWickersham Dam 2
Sioux, NE
Low Hazard 28 ftSemroska Dam 9790
Sioux, NE
Low Hazard 10 ftEberspecher Dam
Sioux, NE
Low Hazard 19 ftCoffee Dam 1
Sioux, NE
Low Hazard 27 ftStaudenmaier Dam
Sioux, NE
Low Hazard 20 ftCoffee Dam
Sioux, NE
Low Hazard 14 ftEberspecher Dam 1
Sioux, NE
Low Hazard 25 ftFrequently Asked Questions
What is the hazard classification of Serres Dam 2?
Serres Dam 2 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Serres Dam 2?
Serres Dam 2 is owned by Box X Ranch Inc (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Serres Dam 2 built?
Serres Dam 2 was completed in 1946, making it 80 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Serres Dam 2?
Serres Dam 2 serves the following purposes: Irrigation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Serres Dam 2?
Serres Dam 2 has a dam height of 23 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Serres Dam 2 last inspected?
Serres Dam 2 was last inspected on May 8, 2023. Inspection dates indicate when a formal review occurred, not the results of that inspection.