Salmon Lake Dam

UNNAMED TRIBUTARY ROCKY FORK CREEK· Parke, Indiana· Built 1952· Earth· 25 ft tall
Low Hazard Recreation Private

Key Takeaway

Salmon Lake Dam is classified as low hazard in Indiana. It was completed in 1952 and is 74 years old. Its primary use is recreation.

Physical Details

Dam Height 25 ft (taller than 42.2% in IN)
Dam Length230 ft
Dam TypeEarth
Max Storage59 acre-ft
Normal Storage29 acre-ft
Surface Area10 acres
Drainage Area0 sq mi
Max Discharge703 cfs
Year Completed1952 (74 years old)
NID IDIN00701

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: February 10, 2016
State Regulated: Yes
Regulatory Agency: IDNR

Ownership

FRED SALMON FARM, L.P.

Private

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Salmon Lake Dam?

Salmon Lake Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Salmon Lake Dam?

Salmon Lake Dam is owned by FRED SALMON FARM, L.P. (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Salmon Lake Dam built?

Salmon Lake Dam was completed in 1952, making it 74 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Salmon Lake Dam?

Salmon Lake Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Salmon Lake Dam?

Salmon Lake Dam has a dam height of 25 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Salmon Lake Dam last inspected?

Salmon Lake Dam was last inspected on February 10, 2016. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.