Russell Tank Dam
Key Takeaway
Russell Tank Dam is classified as low hazard in Arizona. It was completed in 1930 and is 96 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 30 ft (taller than 51.1% in AZ) |
| Dam Length | 500 ft |
| Dam Type | Earth |
| Max Storage | 60 acre-ft |
| Normal Storage | 30 acre-ft |
| Drainage Area | 2 sq mi |
| Max Discharge | 540 cfs |
| Year Completed | 1930 (96 years old) |
| NID ID | AZ82407 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
USDA FS
Federal Government
Frequently Asked Questions
What is the hazard classification of Russell Tank Dam?
Russell Tank Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Russell Tank Dam?
Russell Tank Dam is owned by USDA FS (Federal Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Russell Tank Dam built?
Russell Tank Dam was completed in 1930, making it 96 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Russell Tank Dam?
Russell Tank Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond, Fish And Wildlife Pond, Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Russell Tank Dam?
Russell Tank Dam has a dam height of 30 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Russell Tank Dam last inspected?
Russell Tank Dam was last inspected on August 21, 2018. Inspection dates indicate when a formal review occurred, not the results of that inspection.