Romo
Key Takeaway
Romo is classified as low hazard in Montana. It was completed in 1962 and is 64 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 25 ft (taller than 70.3% in MT) |
| Dam Length | 400 ft |
| Dam Type | Earth |
| Max Storage | 58 acre-ft |
| Normal Storage | 35 acre-ft |
| Year Completed | 1962 (64 years old) |
| NID ID | MT02543 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
ROMO FARMS INC
Private
Nearby Dams
Chanlin
Phillips, MT
Low Hazard 27 ftOhs
Phillips, MT
Low Hazard 14 ftMartin #1 (Phillips)
Phillips, MT
Low Hazard 25 ftPippen
Valley, MT
Low Hazard 12 ftBruckner #2
Phillips, MT
Low Hazard 14 ftFisher
Valley, MT
Low Hazard 20 ftPr-40 Retention Dam
Phillips, MT
Low HazardMcnab Dam
Valley, MT
Low HazardFrequently Asked Questions
What is the hazard classification of Romo?
Romo is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Romo?
Romo is owned by ROMO FARMS INC (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Romo built?
Romo was completed in 1962, making it 64 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Romo?
Romo serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Romo?
Romo has a dam height of 25 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.