Rock Canyon E.C. #2
Key Takeaway
Rock Canyon E.C. #2 is classified as low hazard in Colorado. It was completed in 1973 and is 53 years old. Its primary use is flood risk reduction.
Physical Details
| Dam Height | 20 ft (taller than 36.1% in CO) |
| Dam Length | 460 ft |
| Dam Type | Earth |
| Max Storage | 50 acre-ft |
| Normal Storage | 29 acre-ft |
| Surface Area | 4 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 1,800 cfs |
| Year Completed | 1973 (53 years old) |
| NID ID | CO00114 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
THOMAS H. BRADBURY
Private
Nearby Dams
Frequently Asked Questions
What is the hazard classification of Rock Canyon E.C. #2?
Rock Canyon E.C. #2 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Rock Canyon E.C. #2?
Rock Canyon E.C. #2 is owned by THOMAS H. BRADBURY (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Rock Canyon E.C. #2 built?
Rock Canyon E.C. #2 was completed in 1973, making it 53 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Rock Canyon E.C. #2?
Rock Canyon E.C. #2 serves the following purposes: Flood Risk Reduction. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Rock Canyon E.C. #2?
Rock Canyon E.C. #2 has a dam height of 20 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Rock Canyon E.C. #2 last inspected?
Rock Canyon E.C. #2 was last inspected on November 17, 2020. Inspection dates indicate when a formal review occurred, not the results of that inspection.