Regan Lake Dam
Key Takeaway
Regan Lake Dam is classified as low hazard in Georgia. Its primary use is recreation.
Physical Details
| Dam Height | 13 ft (taller than 12.9% in GA) |
| Dam Length | 720 ft |
| Dam Type | Earth |
| Max Storage | 170 acre-ft |
| Normal Storage | 104 acre-ft |
| Surface Area | 23 acres |
| NID ID | GA05422 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Stephen K. Dozier
Private
Nearby Dams
Jackson Lake Dam
Calhoun, GA
Low Hazard 11 ftGriffin Lumber Company Lake Dam
Calhoun, GA
Unknown 13 ftTaylor Lake Dam
Calhoun, GA
Low Hazard 14 ftTaylor Lake Dam South
Calhoun, GA
Low Hazard 11 ftDeer Run Plantation Lake Dam
Calhoun, GA
Low Hazard 11 ftRothesay Plantation Lake Dam
Calhoun, GA
Low Hazard 9 ftTaylor Lake Dam Central
Calhoun, GA
Low Hazard 13 ftTaylor Lake Dam East
Calhoun, GA
Low Hazard 16 ftFrequently Asked Questions
What is the hazard classification of Regan Lake Dam?
Regan Lake Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Regan Lake Dam?
Regan Lake Dam is owned by Stephen K. Dozier (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Regan Lake Dam?
Regan Lake Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Regan Lake Dam?
Regan Lake Dam has a dam height of 13 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Regan Lake Dam last inspected?
Regan Lake Dam was last inspected on October 15, 2015. Inspection dates indicate when a formal review occurred, not the results of that inspection.