Ream
Key Takeaway
Ream is classified as low hazard in Oklahoma. It was completed in 1940 and is 86 years old. Its primary use is other.
Physical Details
| Dam Height | 25 ft (taller than 29.9% in OK) |
| Dam Length | 1,050 ft |
| Dam Type | Earth |
| Max Storage | 148 acre-ft |
| Normal Storage | 130 acre-ft |
| Max Discharge | 992 cfs |
| Year Completed | 1940 (86 years old) |
| NID ID | OK10705 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
LELAND & DONNA DUYCK
Private
Nearby Dams
SCS-Lower Clear Boggy Creek Site-17
Johnston, OK
Low Hazard 40 ftSCS-Lower Clear Boggy Creek Site-16
Johnston, OK
Low Hazard 39 ftSCS-Delaware Creek Site-003
Johnston, OK
Significant Hazard 24 ftSCS-Lower Clear Boggy Creek Site-14
Atoka, OK
Low Hazard 47 ftSCS-Delaware Creek Site-005
Johnston, OK
Low Hazard 41 ftWapanucka
Johnston, OK
Low Hazard 20 ftSCS-Delaware Creek Site-006
Johnston, OK
Low Hazard 34 ftSCS-Delaware Creek Site-002
Johnston, OK
Low Hazard 28 ftFrequently Asked Questions
What is the hazard classification of Ream?
Ream is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Ream?
Ream is owned by LELAND & DONNA DUYCK (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Ream built?
Ream was completed in 1940, making it 86 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Ream?
Ream serves the following purposes: Other. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Ream?
Ream has a dam height of 25 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Ream last inspected?
Ream was last inspected on December 1, 2010. Inspection dates indicate when a formal review occurred, not the results of that inspection.