Raymond Blair Dam
Key Takeaway
Raymond Blair Dam is classified as significant hazard in Texas. It was completed in 1986 and is 40 years old. Its primary use is other. Significant hazard means failure could cause economic or environmental damage. Learn more.
Physical Details
| Dam Height | 27 ft (taller than 58.3% in TX) |
| Dam Length | 270 ft |
| Dam Type | Earth |
| Max Storage | 80 acre-ft |
| Normal Storage | 12 acre-ft |
| Surface Area | 1 acres |
| Drainage Area | 2 sq mi |
| Max Discharge | 616 cfs |
| Year Completed | 1986 (40 years old) |
| NID ID | TX06450 |
Safety Information
No probable loss of human life, but can cause economic loss, environmental damage, or disruption of lifeline facilities.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
CLARENCE MINKS
Private
Nearby Dams
Moore Lake Dam
Parker, TX
High Hazard 27 ftClear Fork Trinity River WS SCS Site 21 Dam
Parker, TX
Low Hazard 50 ftCovered Bridge Canyon Dam No 2
Parker, TX
Significant Hazard 13 ftCovered Bridge Canyon Dam No 7
Parker, TX
Significant Hazard 17 ftLake Weatherford Dam
Parker, TX
High Hazard 69 ftClear Fork Trinity River WS SCS Site 23 Dam
Parker, TX
High Hazard 66 ftWalsh Lake Dam
Parker, TX
Low Hazard 18 ftClear Fork Trinity River WS SCS Site 22a Dam
Parker, TX
Low Hazard 41 ftFrequently Asked Questions
What is the hazard classification of Raymond Blair Dam?
Raymond Blair Dam is classified as Significant Hazard. No probable loss of human life, but can cause economic loss, environmental damage, or disruption of lifeline facilities. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Raymond Blair Dam?
Raymond Blair Dam is owned by CLARENCE MINKS (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Raymond Blair Dam built?
Raymond Blair Dam was completed in 1986, making it 40 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Raymond Blair Dam?
Raymond Blair Dam serves the following purposes: Other. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Raymond Blair Dam?
Raymond Blair Dam has a dam height of 27 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Raymond Blair Dam last inspected?
Raymond Blair Dam was last inspected on November 17, 2009. Inspection dates indicate when a formal review occurred, not the results of that inspection.