Ralph Hampton
Key Takeaway
Ralph Hampton is classified as low hazard in South Dakota. It was completed in 1953 and is 73 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 21 ft (taller than 40.7% in SD) |
| Dam Length | 810 ft |
| Dam Type | Earth |
| Max Storage | 150 acre-ft |
| Normal Storage | 115 acre-ft |
| Max Discharge | 2,520 cfs |
| Year Completed | 1953 (73 years old) |
| NID ID | SD02087 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
RALPH HAMPTON
Private
Nearby Dams
Gerbracht Dam
Perkins, SD
Low Hazard 28 ftR. Hampton No.1
Meade, SD
Low Hazard 16 ftHaines Dam No. 2
Meade, SD
Low Hazard 13 ftRoger Weiss
Meade, SD
Low Hazard 18 ftD. Wood
Meade, SD
Low Hazard 14 ftWhite Ranch
Perkins, SD
Low Hazard 21 ftHaines Dam No. 1
Meade, SD
Low Hazard 16 ftL. Ingalls No.2
Meade, SD
Low Hazard 21 ftFrequently Asked Questions
What is the hazard classification of Ralph Hampton?
Ralph Hampton is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Ralph Hampton?
Ralph Hampton is owned by RALPH HAMPTON (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Ralph Hampton built?
Ralph Hampton was completed in 1953, making it 73 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Ralph Hampton?
Ralph Hampton serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Ralph Hampton?
Ralph Hampton has a dam height of 21 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.