Powers Eugene
Key Takeaway
Powers Eugene is classified as low hazard in Oklahoma. It was completed in 1961 and is 65 years old. Its primary use is other.
Physical Details
| Dam Height | 29 ft (taller than 51.9% in OK) |
| Dam Length | 228 ft |
| Dam Type | Earth |
| Max Storage | 90 acre-ft |
| Normal Storage | 40 acre-ft |
| Surface Area | 2 acres |
| Max Discharge | 1,190 cfs |
| Year Completed | 1961 (65 years old) |
| NID ID | OK13202 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
BILL & J POWERS
Private
Nearby Dams
Junior Tillman No.1
Canadian, OK
Low Hazard 30 ftNiles Ranch Dam
Canadian, OK
Significant Hazard 48 ftCedar Lake Dam
Canadian, OK
High Hazard 45 ftChiles Chester
Canadian, OK
Low Hazard 30 ftAllen West
Canadian, OK
Low Hazard 29 ftRidenour
Canadian, OK
Low Hazard 27 ftDam OK13204
Canadian, OK
Low Hazard 34 ftAlvin R & Leigh R
Canadian, OK
Low Hazard 40 ftFrequently Asked Questions
What is the hazard classification of Powers Eugene?
Powers Eugene is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Powers Eugene?
Powers Eugene is owned by BILL & J POWERS (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Powers Eugene built?
Powers Eugene was completed in 1961, making it 65 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Powers Eugene?
Powers Eugene serves the following purposes: Other. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Powers Eugene?
Powers Eugene has a dam height of 29 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Powers Eugene last inspected?
Powers Eugene was last inspected on August 19, 2010. Inspection dates indicate when a formal review occurred, not the results of that inspection.