Powers Dam
Key Takeaway
Powers Dam is classified as low hazard in Texas. It was completed in 1921 and is 105 years old. Its primary use is other.
Physical Details
| Dam Height | 9 ft (taller than 2.7% in TX) |
| Dam Length | 100 ft |
| Dam Type | Gravity |
| Max Storage | 218 acre-ft |
| Normal Storage | 218 acre-ft |
| Surface Area | 0 acres |
| Drainage Area | 0 sq mi |
| Year Completed | 1921 (105 years old) |
| NID ID | TX03640 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
LLOYD CLEVELAND
Private
Nearby Dams
Lester Clark Dam
Stephens, TX
Low Hazard 17 ftStevens Water Lake Dam
Stephens, TX
Low Hazard 9 ftDooley Lake Dam
Stephens, TX
Low Hazard 27 ftCrystal Falls Dam
Stephens, TX
Low Hazard 10 ftHugh Dickie Lake Dam
Throckmorton, TX
Low Hazard 23 ftHubbard Creek Dam
Stephens, TX
High Hazard 112 ftLake Woodson Dam
Throckmorton, TX
High Hazard 23 ftTexas Lake Dam No 2
Stephens, TX
Low Hazard 10 ftFrequently Asked Questions
What is the hazard classification of Powers Dam?
Powers Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Powers Dam?
Powers Dam is owned by LLOYD CLEVELAND (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Powers Dam built?
Powers Dam was completed in 1921, making it 105 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Powers Dam?
Powers Dam serves the following purposes: Other. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Powers Dam?
Powers Dam has a dam height of 9 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Powers Dam last inspected?
Powers Dam was last inspected on November 18, 1971. Inspection dates indicate when a formal review occurred, not the results of that inspection.