Phillips Park Lake Dam
Key Takeaway
Phillips Park Lake Dam is classified as high hazard in Texas. It was completed in 1920 and is 106 years old. Its primary use is recreation. High hazard means loss of life is likely if the dam fails — it does not indicate the dam's current condition. Learn more.
Physical Details
| Dam Height | 25 ft (taller than 50.9% in TX) |
| Dam Length | 650 ft |
| Dam Type | Earth |
| Max Storage | 162 acre-ft |
| Normal Storage | 144 acre-ft |
| Surface Area | 13 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 2 cfs |
| Year Completed | 1920 (106 years old) |
| NID ID | TX01105 |
Safety Information
Loss of human life is likely if the dam fails.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
SARAH GALLAGHER
Private
Nearby Dams
Pilot Grove Creek WS SCS Site 80 Dam
Collin, TX
High Hazard 34 ftPilot Grove Creek WS SCS Site 83a Dam
Collin, TX
High Hazard 27 ftPilot Grove Creek WS SCS Site 79 Dam
Collin, TX
High Hazard 31 ftPilot Grove Creek WS SCS Site 82 Dam
Collin, TX
High Hazard 25 ftPilot Grove Creek WS SCS Site 75 Dam
Collin, TX
High Hazard 47 ftPilot Grove Creek WS SCS Site 76 Dam
Collin, TX
Low Hazard 30 ftPilot Grove Creek WS SCS Site 85b Dam
Collin, TX
Low Hazard 39 ftPilot Grove Creek WS SCS Site 77 Dam
Collin, TX
Low Hazard 25 ftFrequently Asked Questions
What is the hazard classification of Phillips Park Lake Dam?
Phillips Park Lake Dam is classified as High Hazard. Loss of human life is likely if the dam fails. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Phillips Park Lake Dam?
Phillips Park Lake Dam is owned by SARAH GALLAGHER (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Phillips Park Lake Dam built?
Phillips Park Lake Dam was completed in 1920, making it 106 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Phillips Park Lake Dam?
Phillips Park Lake Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Phillips Park Lake Dam?
Phillips Park Lake Dam has a dam height of 25 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Phillips Park Lake Dam last inspected?
Phillips Park Lake Dam was last inspected on April 22, 2022. Inspection dates indicate when a formal review occurred, not the results of that inspection.